![sako finnbear 30.06 sako finnbear 30.06](http://media.liveauctiongroup.net/i/14162/14348171_2.jpg)
SAKO FINNBEAR 30.06 DRIVER
Loosen the firing pin locking screw (19) with a small screw driver (Fig. 2), turn the bolt sleeve (7) clockwise until it disengages from the body (Fig. Hold the bolt body (10) in the left hand and. depress the bolt release button on the bolt stop assembly (2) with the left thumb, lift the bolt handle and withdraw the bolt from the rear of the receiver. NOTE: Be sure screw (C) and its lock nut (D) are tight before attempting adjustment. Backlash may be reduced, if required, by turning in screw (E). To increase weight of pull, reverse above procedure. To lessen weight of pull, loosen lock nut (A) and back of screw (B) until desired freight is reached. Weight of pull and blacklash can be adjusted simply and positively by the owner (Fig. The Sako trigger is factory adjusted for sear engagement, at tempts to change this adjustment could be hazardous and would void the guarantee. Separating the barreled action from the stock is done conventionally by first removing the front and rear trigger guard screws. One side of the rifle next to the bolt is stamped Sako AV, and the underside of the barrel, just forward of the end of the stock, it's stamped Imported by Stoeger. The one left to me is a Sako L 61 R Finnbear 30-06 Hunter. To reassemble bolt, reverse the above procedure, making sure the firing pin protrusion is between. My uncle passed away a few years ago and left my brothers and me some rifles. With a screwdriver, turn the slotted end of the threaded firing pin (8) downward out of the cocking piece (Fig. ' " ■ \ĭisassembly Procedure a wooden surface to prevent parts loss or injury from spring pressure. The factory recommended firing protrusion specifications are from. If the firing pin is removed or tampered with, it must be correctly readjusted and secured bv its locking screw. The firing pin is threaded into the cocking piece, and hence its protrusion from the bolt face is adjustable. and AIII, indicating action length.Ĭonstruction and disassembly features of these rifles-regardless of name- are similar.īasically a modification of the Mauser system, the Sakos have one unusual feature which must be noted. The Vixen, Forester, and Finnbear names have been dropped in favor of the designations AI. 375 H&H Mag.īy decision of the current Sako importers, Stoeger Industries, the familiar, if confusing, nomenclature of the rifles has now been simplified. 308 the relatively long Finnbears for "standard" length cartridges including. The short action Vixens have been chambered for such calibers as.
![sako finnbear 30.06 sako finnbear 30.06](https://griffinhowe.com/pub/media/catalog/product/cache/256f0556d4aa54325dd54fc73df9c651/_/d/_dsc5668_3.jpg)
These three types are generally similar but differ in action length. Their best-known products are their bolt action center-fire rifles popularized as the Vixen (L-461). Finland, is that country's largest firearm and ammunition manufacturer.